Al Plumbing and heating - Gas Central Heating Problems
When A L Plumbing and Heating attend to your gas boiler service we clean, test and
do a pre-emptive fault-check, with the emphasis on testing all the different functions
of an appliance for correct and safe operation. Some Plumbing and Heating companies
only put a probe in the flue outlet to analyse the contents of the flue gasses,
and if the probe passes they announce the boiler is working correctly and start
writing out the invoice. Then you have the other extreme plumbers and heating engineers
who will strip your boiler and clean it spend hours checking every piece of your
boiler and then they charge you accordingly for the time spent and the checks they
have done
Central Heating Problems
My boiler isn't working and I have no heat.
Check the timer programmer display. Your timer programmer is usually in the airing
cupboard or near the boiler.
Check the electric isolation switch is switched on. The isolation switch is usually
in the airing cupboard or near the boiler. See if the electric isolation switch
is OFF. If it is, switch it on.
The electric isolation switch is on.
Turn the programmer switch to continuous.
Ensure that the room thermostat is turned to maximum to check the heating operation.
Wait for approximately 30 minutes, if you still have no heat call A L Plumbing on 01563 542 207 aand arrange
an appointment with one of our heating engineer.
Power cuts
Why isn't my gas central heating working?
In a power cut the gas central heating system will not work. This is because the
system, even though it is operated by gas, still needs electrical power to run it.
(Gas fires and gas cooker hot plates will not usually be affected by a power cut).
When electrical power has been reinstated, your gas central heating system should
return to work as normal.
The power cut is over I have waited 30 minutes and I still have no heat.
Check the heating programmer is set correctly.
If it is and you still have no heat call A L Plumbing and Heating on 01563 542 207 and arrange for one of our Heating Engineer to call out
Since the power cut my heating hasn't been working properly.
Check the heating programmer is set correctly. If you still have a problem please
call us within working hours to arrange a gas engineer to come out to reset it.